Developing Applications For The Cv30; Developing A New Application - Intermec CV30 User Manual

Chapter 4 — Developing and Installing Applications

Developing Applications for the CV30

Developing a New Application

68
The CV30 Fixed Mount Computers run applications
programmed in Microsoft Visual Studio 2005. You can also use
Microsoft eMbedded Visual C++ 4.0, but some features may not
be available. Use this section to understand the hardware and
software you need to:
• develop a new application for the CV30.
• develop a web-based application for the CV30.
• convert a Trakker Antares application to a CV30 application.
Use the Intermec resource kits to develop new applications to run
on the CV30. The Intermec resource kits are a library of C++ and
.NET components grouped by functionality that you can use to
create applications for the CV30. The resource kits are part of the
Intermec Developer Library (IDL), and can be downloaded from
the Intermec web site at www.intermec.com/idl.
You need these hardware and software components to use the
Intermec resource kits:
• Pentium PC, 400 MHz or higher
• Windows 2000 (Service Pack 2 or later) or Windows XP
(Home, Professional, or Server)
• For native and managed development, Microsoft Visual
Studio 2005
• 128 MB RAM (196 MB recommended)
• 360 MB hard drive space for minimum installation (720 MB
for complete)
• CD-ROM drive compatible with multimedia PC
specification
• VGA or higher-resolution monitor (Super VGA
recommended)
• Microsoft Mouse or compatible pointing device
CV30 Fixed Mount Computer With Windows CE User's Manual