Understanding The Backup Power System; Resetting The Cv30 - Intermec CV30 User Manual

Understanding the Backup Power System

Resetting the CV30

CV30 Fixed Mount Computer With Windows CE User's Manual
Chapter 1 — Using the CV30 Fixed Mount Computer
Attaching the CV30 to Power Using an AC Power Supply
The CV30 contains a backup battery that has enough capacity to
support the suspend state for at least 72 hours. When power is
restored to the CV30, it resumes the state it was in when the
power was removed.
An internal charger automatically charges the backup battery
within 4 hours when external power is supplied. If the backup
battery fails, an amber light on the top of the display turns on.
You must replace your backup battery immediately if you see an
amber light. The backup battery must be replaced by a trained
Intermec service technician. Please contact your local Intermec
service representative for more information.
To check the status of your backup battery
• Tap Start > Settings > Control Panel > Power.
You rarely need to reset the CV30. If the CV30 does not resume
after pressing the Power button, or if the computer or an
application is locked up, you may need to reset it. The CV30 uses
the configuration currently saved in flash memory during the
boot processes. There are two ways to reset the CV30:
• Using the Power button
AC outlet
AC power
supply
Power
cord
9