Configuring Funk Security Using The Profile Wizard - Intermec CV30 User Manual

CV30 Fixed Mount Computer With Windows CE User's Manual
Configuring Static WEP Security With Funk Security
1 Open Intermec Settings.
2 Make sure you have configured the communications
parameters and selected Funk as your security choice.
3 Choose Communications > 802.11 Radio > Funk Security
> Profile.
4 For Association, choose Open.
5 For Encryption, choose WEP.
6 For 8021x, choose None.
7 Define a value for the keys you want to use. You can define up
to four keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13
bytes long depending on the capability of the radio. Set a 5-
byte value for 64-bit WEP or a 13-byte value for 128-bit
WEP. Hex keys must be preceded by 0x and contain 5 or 13
hex pairs.
8 For Transmit key, choose the key you want to use for
transmitting data.
9 Save your settings.

Configuring Funk Security Using the Profile Wizard

You can start 802.11 b/g communications on the CV30 using the
Profile Wizard. A profile contains all the information necessary to
authenticate you to the network, such as login name, password or
certificate, and protocols by which the CV30 is authenticated.
You can have up to four profiles for different networks. For
example, you may have different login names or passwords on
different networks.
To select a profile for Funk security
1 Select Start > Settings > Control Panel > Wireless Network.
or
Tap the iConnect icon (
screen and select Tools > Wireless Settings.
Chapter 3 — Configuring the CV30
)in the lower right corner of the
49