Developing Applications For The Cv60; Developing A New Application - Intermec CV60 User Manual

Chapter 4 — Developing and Installing Applications

Developing Applications for the CV60

Developing a New Application

60
The CV60 Vehicle Mount Computer can run applications that
are programmed in:
• Microsoft eMbedded Visual C++ version 4.0 with SP2 for
native C++ development for CV60s.
Use this section to understand the hardware and software you
need to:
• develop a new application for the CV60.
• develop a web-based application for the CV60.
• convert a Trakker Antares application to a CV60 application.
Use the Intermec resource kits to develop new applications to run
on the CV60. The Intermec Resource kits are a library of C++
and .NET components grouped by functionality that you can
used to create applications for the CV60. The resource kits are
part of the Intermec Developers Library (IDL), and can be
downloaded from the Intermec web site at
www.intermec.com/idl.
You need these hardware and software components to use the
Intermec resource kits:
• Pentium PC, 400 MHz or higher
• Windows 2000 (SP2 or later) or Windows XP (Home,
Professional, or Server)
• 128 MB RAM (196 MB recommended)
• 360 MB hard drive space for minimum installation (720 MB
for complete)
• CD-ROM drive compatible with multimedia PC
specification
• VGA or higher-resolution monitor (Super VGA
recommended)
• Microsoft mouse or compatible pointing device
CV60 Vehicle Mount Computer With Windows CE User's Manual