Installing Applications Using Smartsystems Server; Installing Applications Using Microsoft Activesync - Intermec CV30 User Manual

Installing Applications Using SmartSystems Server

Installing Applications Using Microsoft ActiveSync

CV30 Fixed Mount Computer With Windows CE User's Manual
Chapter 4 — Developing and Installing Applications
• Wavelink Avalanche
The following sections explain how to use each one of these
processes to install your application on the CV30.
You can use the SmartSystems server to drag-and-drop Intermec
applications onto your CV30s. The CV30 ships with the
SmartSystems client, which means it is SmartSystems-enabled.
The console is part of SmartSystems Foundation, which you can
download from www.intermec.com/SmartSystems. For help
using the console, see the online help.
To use SmartSystems console to install an application
1 Download your application file from the Intermec web site
and unzip it on your desktop PC.
2 Double-click the application file to install it. The application
file should appear in the software vault.
3 From the SmartSystems console in the Software Vault, drag-
and-drop the application onto each CV30 in your network.
You can use Microsoft ActiveSync to establish a connection
between your PC and the CV30. ActiveSync transfers files,
synchronizes files, performs remote debugging, and other device
management activities. For more information on installing and
using ActiveSync, see
You can have a USB or 802.11 b/g ActiveSync connection to the
CV30. When you only have a few CV30s to update, you can
copy files using Windows Explorer on a PC.
This procedure assumes that Microsoft ActiveSync is installed on
your PC and is up and running.
To install an application on the CV30 using ActiveSync
1 Connect the CV30 to a PC using a USB cable. You may have
to disconnect and then connect the cable to "wake" the
connection.
2 Wait for a "Connected" message to appear in the Microsoft
ActiveSync application to signal a connection to the CV30.
"Using Microsoft ActiveSync" on page 24.
71