Loading The Preset Race Frequency List; Programming Driver Frequencies - Radio Shack RPO-137 User Manual

Loading the Preset Race Frequency List

For your convenience, six car race frequencies are
preprogrammed. You can use one of these race
frequencies by loading it to the channel banks.
To load the race frequencies:
1. Press Menu.
2. Rotate the knob to select 1: Preset Race, then
press E
PGM
3. Rotate the knob to select 1: Load Race, then
press E
PGM
4. Rotate the knob to select one of the races,
then press E
5. If you select races A, B or C, Load Bank X into
Bank 0 Yes="1" / No="3" appears.
If you select races D, E, or F, Load Bank X into
Bank 0 and 1 Yes="1" / No="3" appears.
6. Press 1 to program the race or press 3 to cancel.

Programming Driver Frequencies

To select the appropriate frequency for each
driver:
1. Press CAR, enter the car's number, then press
E .
PGM
2. If the car number is not stored, Car# XX is
not stored. Program new car? Yes = "E" / No = "
appears.
3. Press E
PGM
4. Enter the tag you want to assign to the car
number (such as driver's name), then press
E .
PGM
5. Enter the frequency of the car, then press
E .
PGM
6. If you want to input another frequency to the
car, press E
.
.
.
PGM
to edit the tag.
.
PGM
1
.
"