Moving A Frequency From A Monitor Memory To A Channel; Manually Selecting A Channel; Special Features - Radio Shack PRO-2039 Owner's Manual

frequency. -d-, SRCH, and UP or DOWN arrows appear on the display.
4. When the scanner finds an active frequency, it stops searching. To
save the frequency into a current monitor memory, press MON. The bar
under the memory number stops flashing.
5. Press UP or DOWN arrows again to continue searching for more active
frequencies.

MOVING A FREQUENCY FROM A MONITOR MEMORY TO A CHANNEL

1. Press MAN.
2. Use the number keys to enter the channel number where you want to store
the monitor frequency. Then press PGM.
3. Press MONITOR and the number of the monitor memory that has the
frequency you want to store. MONITOR and the frequency appear on the
display.
4. Press ENTER. The scanner stores the frequency into the channel.

MANUALLY SELECTING A CHANNEL

You can continuously monitor a specific channel without scanning. This is
useful if you hear an emergency broadcast on a channel and do not want to
miss any details (even though there might be periods of silence) or if you
want to monitor a locked-out channel.
To select a channel, just press MAN. Enter the channel number, and press
MAN again. Or, if the scanner is scanning and stops at the desired
channel, just press MAN one time. Pressing MAN additional times makes the
scanner step through the channels.

SPECIAL FEATURES

DELAY
Many agencies use a two-way radio system that might have a pause between a
query and a reply. The scanner's delay feature waits for 2 seconds after
each transmission while scanning or searching.
To program a 2-second delay for any channel while scanning, manually select