Editing A Tag - Radio Shack RPO-137 User Manual

8. Rotate the knob to select 1: Edit Car#, then
press E
PGM
9. Use the number keys to enter the car number
in 3-digits, then press E
10. Rotate the knob to select 2: Edit Tag, then press
E .
PGM
11. Use the number keys to enter the tag then
press E
PGM
12. To program the next channel in sequence,
press Menu then repeat the steps from 3.
Notes:
• If you entered an invalid frequency in Step
5, Invalid Freq appears and the scanner beeps
error tones. Enter a valid frequency.
• If you entered a frequency in Step 5, which
already exists on another channel, the
scanner beeps an error tone and displays
that channel. Press •CLR to clear the display,
or press E
PGM
channels.
• The scanner automatically rounds the
entered number to the nearest valid
frequency. For example, if you enter 151.473
(MHz), your scanner accepts it as 151.475.
• Rotate the knob if you want to add a frequency
to a clear channel or different bank number.

Editing a Tag

To input a tag:
• Press the number/letter buttons multiple
times until the desired letter appears.
• Rotate the knob clockwise to move the
cursor to the left, counterclockwise to move
to the right.
.
PGM
.
to store the frequency in both
1
.