Programming Search Ranges; Search Skip Memory - Radio Shack RPO-137 User Manual

Programming Search Ranges

To define the search range during a chain search
in each search bank:
1. Press Menu.
2. Rotate the knob to select 3: PGM Chain SRCH.
3. Press E
PGM
4. Rotate the knob to select the bank number
you want to change the range.
5. Rotate the knob to select 1: Edit limit, then
press E
PGM
6. Using the number keys, enter the lower limit
frequency, and then press E
7. Using the number keys, enter the upper limit
frequency, and then press E

Search Skip Memory

You can skip up to 200 specified frequencies
during Fine Tune, Chain, Service Bank Search,
or Signal Stalker I. This lets you avoid unwanted
frequencies or those already stored in a channel.
Note: You cannot skip frequencies during WX
scan.
To skip a frequency, press • CLR / L/OUT when
the scanner stops on the frequency. The scanner
stores the frequency in memory and automatically
resumes the search.
To clear a single frequency from skip memory:
1. Press SRCH/PSE to stop the search.
2. Rotate the knob to select the skipped
frequency. L/O appears.
3. Press • CLR / L/OUT. L/O disappears.
To see all the skipped frequency in a list:
1. Press Func + •CLR / L/OUT.
.
.

.
PGM
.
PGM