The frequency has been copied.
To cancel the copy, press Menu.
Searching
If you do not have a reference to frequencies in
your area, find a transmission using a Fine Tune,
Chain, or Service Bank Search.
While searching, press Func + 2
the delay on or off).
Fine Tune
To search up or down from the currently displayed
frequency using fine tune.
1. Press SRCH in scan mode or press Func +
SRCH in search mode.
2. Rotate the knob to select 0: Fine Tune, then
press E
PGM
Fine tune is also available from an entered
frequency.
1. Press SCAN/MAN to enter manual mode.
2. Use the number keys and •CLR to enter a
frequency.
3. Press SRCH. Fine Tune appears.
4. Press SRCH again to start fine tune.
Note: If you enter an invalid frequency, the
scanner displays Invalid Freq. Press •CLR to
clear.
Service Bank Search
You can search for Car Band, Marine, CB Band,
FRS/GMRS/MURS, Fire/Police, Aircraft, and Ham
Band transmissions without knowing the specific
frequencies used in your area. The scanner is
preprogrammed with all the frequencies allocated
. SRCH appears during searching.
/DLY to turn
ABC