C.3.5: Display All Programmed Points; C.3.6: Step-Through History; C.3.7: View All History; C.3.8: Step-Through Alarm History - Notifier NFS-320 Operation Manual

Remote Terminal Access
C.3.5 Display All Programmed Points
From the "Read Status" menu, select option 3 - Read All Points. The CRT-2 displays a list of the
status of all addressable detectors, modules, system parameters and software zones:
Press <3> <
ENTER
NORMAL SMOKE(PHOTO) DETECTOR ADDR 1D002
NORMAL SMOKE (ION)
NORMAL HEAT(FIXED)
NORMAL SMOKE(LASER) DETECTOR ADDR 1D099
OFF RELEASE CKT
NORMAL MONITOR
OFF RELAY
OFF SOFTWARE ZONE Zone 01
C.3.6 Step-through History
From the "Read Status" menu, select option 4 - History-Step. This option lets you step through all
history events one event at a time. Step through the history list one event at a time by pressing the
Next F5 or Prior F6 function keys.
C.3.7 View All History
From the "Read Status" menu, select option 5 - History ALL. The entire history of events will
display on the screen.
C.3.8 Step-through Alarm History
From the "Read Status" menu, select option 6 - Alarm-History:Step. This option lets you step
through the panel's alarm history one event at a time by pressing the Next F5 or Prior F6 function
keys.
C.3.9 View All Alarm History
From the "Read Status" menu select option 7 - Alarm History All. This entire history of alarm
events will display on the screen, from most recent to oldest event.
Press <7> <
ENTER
************************
ALARM: MAN_RELEASE MODULE ADDR 1M065
ALARM: MAN_RELEASE MODULE ADDR 1M065
ALARM: MAN_RELEASE MODULE ADDR 1M065
ALARM: SMOKE (ION) DETECTOR ADDR 1D129
C.4 Using the CRT-2 for Alter Status
C.4.1 Overview
This section shows how to Alter Status functions from a CRT-2.
NOTE: The panel must be in Local Terminal Mode (LocT) or Local Monitor Mode (LocM).
NOTE: See the NFS-320 Programming Manual for instructions on enabling the CRT port.
64
>
DETECTOR ADDR 1D003
DETECTOR ADDR 1D006
MODULE ADDR 1M001
MODULE ADDR 1M001
MODULE ADDR 1M033
>
ALARM HISTORY START ***********************************
NFS-320/E/C, NFS-320SYS/E Operations Manual — P/N 52747:E1 06/16/2011
Using the CRT-2 for Alter Status
Z003 000%A8 8 ** 1D002
Z002 020%A6 6 ** 1D003
Z001 050% * 1D006
Z004 000%A6 6 *V00 1D099
ZR00 I** 1M001
ZR00 I** 1M001
Z000 *FW 1M033
10:21A 011508 1M065
10:19A 011508 1M065
03:20P 011508 1M065
03:20P 011508 1M065
Z01