Lcd And Led Lighting; Naming (Pages 7 And 8) - Klark Teknik DN9848E Operator's Manual

To select the input source
1
Step through the Set Up menu
to the Input Source select
page.
2
Use the left DATA ENTRY control
knob to select the input source
for channels A and B as shown
opposite.
3
Use the centre DATA ENTRY
control knob to select the input
source for channels C and D in
a similar manner.
Note The 'Ref' menu shows the clock reference for the unit, for example,
Internal. If both input pairs are set to 'DigLock', then this menu
becomes active; turn the right DATA ENTRY control knob to select input
source AB or CD as the clock reference.
7.6. LCD and LED Lighting (Page 6)
If required, the contrast of the alphanumeric display (LCD) and the brightness of the front panel LEDs
can be adjusted to suit.
To adjust the contrast of the LCD
Step to the LCD page. Turn the left DATA ENTRY control
knob to adjust the display contrast. The default
setting is 5, with a range of 0-10.
To adjust the brightness of the front panel LEDs
Step to the LCD page. Turn the right DATA ENTRY control knob to adjust the LED brightness.
The default setting is 4, with a range of 0-15.

7.7. Naming (Pages 7 and 8)

To help with system identification, the DN9848E unit and the
current working memory may each be given a name up to 24
characters long.
Both names are shown in the Home page and are retained
after power down, which is particularly useful for system
reassembly when changing venues.
To enter a name
1
Use the left DATA ENTRY control knob to move the cursor right or left, and the centre control
knob to select the letter, number or symbol. ( Tip: to clear existing characters enter a blank
space which can be found after the letter "Z".)
2
Press the HOME button to apply the new name.
Names can also be allocated to individual input and output channels via their associated menus (see
Sections 5.2.2 and 6.2.2).
All names are stored with User and System memory settings. The Store function will assume the
working memory name as the default memory name, prompting you to edit it if required, see
Section 8 "Storing and Recalling Settings".
Security and Other Set Up Options
27