6.4. Output Gain and Mute - Front Panel Control
Each output is equipped with a dual-action rotary/push-switch control for adjusting or muting the
output level. Note that zero mark on the control refers to the baseline output level set in the Output
menu (see Section 6.2.3) and hence the rotary control provides fine-tuning relative to this level.
To increase/decrease the level
To mute an output
To un-mute an output
To mute all outputs
To un-mute all outputs
Output Channels
turn clockwise/anti-clockwise
push in and hold until the red ring illuminates
push in and hold until the red ring light
extinguishes
push in and hold an unlit output until it and then
all other controls illuminate
push in and hold a muted (illuminated) output
until it and then all other red rings extinguish
19