Navigating The Dn9848E Menus; Input And Output Menus; Set Up Menu; Store And Recall - Klark Teknik DN9848E Operator's Manual

4.2. Navigating the DN9848E Menus

The DN9848E menu system is divided logically into Input, Output and Set Up menus, plus two
function-specific menus for quick access to the Store and Recall commands. A menu map is provided
at the end of this section for reference purposes.
4.2.1

Input and Output Menus

Each of the four input channels (A-D) and eight output channels (1-8) have their own set of menu
pages, accessed and stepped through by pressing the channel's blue MENU ACCESS button.
When you make a selection, the MENU ACCESS button illuminates to show that channel is now active at
the programming panel. In addition, all the menu pages show the channel number (1 to 8) or letter
(A to D) in the top left-hand corner.
To program each parameter in turn across all the input/output channels, you can skip to the same
page on another input/output channel by pressing the MENU ACCESS button on the other channel.
If you want to jump back to the first page on a different channel, press the HOME button and then the
required channel button.
Note If you cannot select any of the channel menu pages from the front panel, then your unit may
be set for remote control or the front panel may be locked as indicated on the alphanumeric
display. Please refer to Sections 7.2 and 7.4 for more details.
4.2.2

Set Up Menu

Global parameters, such as the Comms Channel for remote control set ups, security options and unit
labelling are defined in the Set Up menu. To switch to the Set Up menu, press and hold the black
HOME (SET UP) button located on the programming panel. Press the button repeatedly to cycle through
the menu pages.
4.2.3

Store and Recall

The Store and Recall menu pages are accessed by the corresponding buttons on the programming
panel. To abort and exit the store/recall menu press the HOME button.
4.2.4

Home Page

The Home page, displayed at the end of the start up routine, indicates the unit name (set by the
User) and the current working memory which was retained from the previous session.
the Home page at any time, press and release the HOME button. (The HOME button is a dual function
button – a short press returns to the Home page while a long press opens the Set Up menu.) The
HOME button can also be pressed to abort a Store or Recall process.
DN9848E Menu System
7
To return to