Rogramming Ettings; The Dn9848E Programming Panel - Klark Teknik DN9848E Operator's Manual

DN9848E Menu System
4. P
ROGRAMMING

4.1. The DN9848E Programming Panel

All the parameters for input and output signal processing and routing are defined via function-specific
menu pages that are displayed and edited at the programming panel shown below. As described in
the illustration, each menu page uses a standard layout that relates the displayed parameters to the
three DATA ENTRY control knobs, which are used to adjust the parameter values.
DATA ENTRY control knobs adjust the left,
centre and right parameter values at the
display, in corresponding order. If there
are only one or two parameters, only the
active controls are lit.
When the menu page requires text entry, '<>'
indicates which DATA ENTRY control knob moves
the cursor left and right while "chr" indicates
which control knob changes the alphanumeric
character.
When there are sub-menu pages, either the left
or right DATA ENTRY control knob will be allocated
to moving forward ( - - >) or back up ( < - -). This
will be indicated here by a control knob icon
marked L (Left) or R (Right).
S
ETTINGS
The alphanumeric display,
showing the menu page for
programming PEQ1
Left knob moves cursor
The icon indicates
that turning the left
knob clockwise will
access the sub-menu
page.
6
The adjustable parameters are
named on the top line.
Current values are given
below in corresponding order.
Centre knob
changes character
Right knob
inactive
Cursor