Part Identification Chart - Pro-Form C840 User Manual

PART IDENTIFICATION CHART

See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST in the center of this manual. Important: Some parts may have
been pre-assembled for shipping purposes. If a part is not in the parts bag, check to see if it has been
pre-attached. If a part is missing, call toll-free 1-877-992-5999.
M10 Nylon Locknut (97)
M8 Nylon Locknut (96)
M6 Nylon Locknut (124)
M10 Washer (99)
M8 Washer (100)
M6 Washer (101)
25mm Retainer Ring (93)
M8 x 12mm Shoulder
Bolt (131)
1/4" x 9.5mm Allen
Head Set Screw (120)
25mm Round Outer Cap (94)
M10 x 50mm Screw (108)
M10 x 45mm Bolt (112)
M6 x 38mm Screw (102)
M10 x 25mm Screw (121)
M10 x 19mm Hex Head Bolt (132)
M10 x 19mm Screw (118)
M8 x 16mm Screw (98)
M8 x 16mm Shoulder Bolt (129)
M6 x 16mm Screw (104)
M4 x 16mm Screw (107)
1/4" x 14mm Screw (119)