•
The hotel operator must be using a 6-line display PT.
•
Each DSS button light shows the current status as follows:
Off: Check-out
Red on: Check-in
•
While in Room Status Control mode, the hotel operator extension is considered to be busy.
•
While in Room Status Control mode, the display, INTERCOM button, and flexible buttons do not
operate for other telephone features.
•
Some of the operations in this section require system programming. Consult your dealer.
Check-in
The hotel operator can change the room status of extensions to check-in by using the Check-in button
assigned on his extension.
To check in
Display PT
While on-hook
(Check-in)
Press Check-in .
•
After check-in, Remote Extension Dial Lock is deactivated, and the guest can make outside calls
from the room extension. (Refer to "2.1.1 Extension Control".)
•
When the room status of extensions is changed, detailed room status information is recorded
automatically. This requires system programming.
<Example>
Date
Time
02/02/00
03:07PM 1234
ENTER
extension no.
OR
(DSS)
Dial extension number and then press
"ENTER", or press desired DSS .
Ext
CO
Dial Number
Check in
2.1 Control Features
EXIT
YES
OR
(Check-in)
Press "YES" .
Press " EXIT"
or Check-in .
User Manual
121