Panasonic KX-TDA50 User Manual page 107

To view the log information with the Navigator key
T7600
While on-hook
Press Left twice.
To clear the log information
Display PT
While viewing the log information
(Call Log)
OR
Press Call Log , or Up or Down
until desired party appears.
To call
Display PT
While viewing the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
• The Call Log button light shows the current status as follows:
Off: No incoming call. Or you have already viewed the call log.
Red on: You have missed calls to view.
• If your call is answered by another extension, the caller's information is recorded on the displays
of both your extension and the answering extension.
• You can lock your call log display by using an extension PIN (Personal Identification Number), so
that you can prohibit access to your logged information. Refer to "3.1.2 Settings on the
Programming Mode".
• You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).
• If a call arrives while you are using the call log, the call log display will be replaced with the caller's
information.
• For a PS user, refer to "Operating Instructions" for PS.
Press Up or Down until
desired party appears.
TRANSFER
Press TRANSFER .
Off-hook.
1.11 Display Proprietary Telephone
User Manual 107