Matrix T3xe Owner's Manual page 30

ASSEMBLY STEp 5
yEllOW HARdWARE bAG CONTENTS :
41
30
41
SOCKET HEAD CAP SCREW
Qty: 4
2
N69 T03 N59
Open HARdWARE bAG 3.
A
Slide CONSOlE through the CONSOlE
B
MAST bOOTS.
NOTE: Make sure the arrows on the mast rings
are pointing upward towards the console when
sliding into place.
Connect CONSOlE CAblES.
C
NOTE: Be careful not to pinch any wires
while assembling the right console mast.
Connect CONSOlE to RIGHT CONSOlE
D
MAST using 2 bOlTS (A), 2 SpRING
WASHERS (b) and 2 ARC WASHERS (C).
Repeat on other side.
E
Fold the deck into the upright position until
F
the foot latch engages. Rotate the CONSOlE
MASTS until the spacing between the
handlebars and the deck are the same. Tighten
bOlTS from step 1 and then step 3.