Setting Rf Power - Shure MXW Series User Manual

Wireless Management

Setting RF Power

The RF radius of a configuration can be limited to allow another MXW system to re-use the frequency time-slots. It is best practice to use the lowest setting
that supports the installation. Perform a walk-around test with the transmitters to ensure that the coverage setting is sufficient.
The RF Power is set from the Preferences tab of the control software. The setting applies to each access point in the Configuration. Reference the following
table for setting the RF Power.
RF Power Levels
Setting
Max
High
Medium (default)
Low
33
Transmitter Power (mW)
80
16
3
1
a
Room A Room B
Coverage Distance from APT
150
100
50
25
Room C Room D
Typical Application
Ballroom and auditorium spaces
Large meeting spaces and lecture
halls
Conference, training and
multipurpose rooms
Small video-conference rooms and
boardrooms