Warnings - Canon PIXMA MP500 Service Manual

Memory card is not set. Insert the
card after checking the direction.
DPOF information is not saved in
the memory card.
The number of copies to print is
not set. Input the number of copies.
This layout is available only for
A4 or 8.5"x11"(LTR).
Settings cannot be changed when
printing stickers.
Change the setting after removing
the card.
The card is currently write-
enabled. Set to read-only mode
before performing operation.
The paper size is not correct.
Check the page size you have set.
Failed to scan Photo Index Sheet.
Check the orientation, position and
marking. <See manual>
Feed switch cannot be changed.

2-4. Warnings

Warning
Low ink
Print head temperature
rise
Protection of excess
999.
No memory card is inserted in the slot.
DPOF print was selected in the menu,
but no DPOF files are contained in the
memory card.
Multi-photo print was attempted without
specifying the print quantity (with the
print quantity left "0" (zero)).
In Layout print, "Mixed 1, 2, or 3" which
is available only with A4 or LTR size
paper is selected, but the paper size is not
set to A4 or LTR.
With Sticker print selected, the Settings
button was pressed.
With a memory card inserted in the slot,
change of the Read/Write attribute was
attempted.
With the memory card set to the Write-
enabled mode, Card Direct printing
operation was attempted from the menu.
Non-supported size of paper for Camera
Direct printing is selected.
The machine failed in scanning the
Photo Index Sheet.
The paper source cannot be changed
from the cassette to the ASF, or vice
versa.
Message on the LCD
The following ink is low. Continue?
(Icon of each ink tank)
Yes No
In Camera Direct Printing, only "Yes" can be
selected.
If the print head temperature does not fall, the
error code "5200" is displayed, indicating the
print head temperature rise error.
If the print head temperature does not fall, the If the print head temperature exceeds the
returns to the value before the error.
Set a memory card.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
The error message is displayed for a
while, then disappears. Specify the print
quantity.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
The error message is displayed for a
while, then the LCD automatically
returns to the display before the error
occurrence.
Cancel printing on the digital camera.
Press the OK button to clear the error.
The LCD automatically returns to the
display before the error occurrence.
Turn off the machine, and turn it on
again.
- Select Yes, and press the OK button.
=> Printing starts, and it is indicated on the
LCD.
- Select No, and press the OK button.
=> Printing is cancelled, and the LCD
returns to the display immediately
before printing was attempted.
When the print head temperature falls, the
error is automatically cleared.
Note:
If the print head temperature exceeds the
specified limit when the scanning unit (printer
cover) is opened, the carriage does not move to
the ink tank replacement position.
1-10
Solution