Configuring A/V and Closed Caption Settings
Additional HDMI Settings Screen
To configure the DCX700 settings on the Additional HDMI Settings menu screen:
1. With an HDMI connection in place, power off the DCX700 and then immediately
press the MENU key on the remote control.
2. This will display the main User Settings menu.
3. Move the cursor next to the "Additional HDMI Settings" option and press the ►
The Additional HDMI Settings menu options are:
DCX700 High-Definition Digital Set-Top Box • User Guide
An example of the Additional HDMI Settings menu.
The HDMI/DVI Mode setting allows you to optimize the HDMI output to work
with both DVI-equipped televisions and HDMI equipped televisions. By
default, this option is set to HDMI. The options are used as follows:
HDMI – The DCX700 is optimized to work with an HDMI television or home
DVI – The DCX700 is optimized to work with a DVI television or display
device (connected via an HDMI-to-DVI adapter).
The Color Space setting allows you to adjust the color space used by the
DCX700 to generate the video signals on the HDMI output. By default, this
option is set to YCC 4:4:4. The options are used as follows:
YCC 4:4:4 – The DCX700 will generate video signals within the YCC color
RGB – The DCX700 will generate video signals within the RGB color space.
Note: Adjusting these settings could result in a loss of video. Only a
professional installer or someone with a good working knowledge of the color
spaces supported by the TV should change this setting.