Schwinn 145 Owner's Manual page 10

7. Attach Handlebars to Frame Assembly
Note: Put the T-nut (I) into the Handlebar slider and align it with the second hole (9a) to install the Console Slider
Adjustment Knob (J) and washer (L). Push the Console Mast cable slightly down and push the Handlebar
into the Handlebar slider until the holes are aligned to pull the cable up.
NOTICE: Do not crimp the cables. Make sure that the lower Heart Rate cable (9b) is connected.
D
9
9
9b
10
9a
9b
H
G
9