Peripheral Devices - Supermicro X9DRW-3F User Manual

X9DRW-3F/X9DRW-iF Motherboard User's Manual
Peripheral
Devices
BIOS
Power
Management
PC Health
Monitoring
•
RAID (Linux)
SAS/SATA/SCU Connection
•
Eight (8) SAS/SATA Connections 0~3, 4~7 (For
X9DRW-3F)
RAID 0, 1, 10
•
Four (4) SATA Connections 0~3 (For X9DRW-iF)
RAID 0, 1, 5, 10
IPMI 2.0
•
IPMI 2.0 supported by the Renesas BMC
Serial (COM) Port
•
Two (2) Fast UART 16550 connections: 9-pin RS-
232 port
Note: COM2 does not support modem func-
tion)
VGA
•
Backplane VGA Port 1
USB Devices
•
Four (4) USB ports on the rear I/O panel (USB 0/1,
USB 2/3),
•
Two (2) Front Panel USB headers (USB 4/5)
•
16 MB AMI BIOS
•
APM 1.2, PCI 2.3, ACPI 1.0/2.0/3.0/4.0, USB Key-
board, Plug & Play (PnP) and SMBIOS 2.3
•
ACPI/ACPM Power Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Keyboard Wake-up from Soft-off
•
Intel Intelligent Power Node Manager (Available
®
when the NMView utility is installed in the system)
•
Management Engine
CPU Monitoring
•
Onboard voltage monitors for onboard chipset,
memory, processors, standby power, and other criti-
cal components.
•
CPU 6-Phase switching voltage regulator
•
CPU/System overheat LED and control
1-8
RAID 0, 1, 10
Flash EEPROM
®