Supermicro X9DRW-3F User Manual page 13

JPME2
JWD1
Connectors
COM1/COM2
FAN1~4,FANA, FANB
I-SATA 0~5
JBAT1
JD1
JF1
JIPMB1
JL1
JLPC1
JOH1
JPI C1
2
JPW1
JPW2/3
JPW4
JSD1
JSTBY1
LAN1/2
(IPMI) LAN
SATA/SCU 0~3, 4~7
SP1
SXB1A
SXB1B
SXB1C
SXB2
Note 1: For SXB1A/SXB1B/SXB1C PCI-Exp. slots to work properly, please
use an SMC-proprietary riser card (eg. RSC-RIUW-2E16) in the slots.
Note 2: For SXB2 PCI-Exp. slot to work properly, please use the SMC-
proprietary riser card RSC-R2UW-2EBR or RSC-R1UW-E8R in the slot.
Management Engine (ME)
Manufacture Mode Select
Watch Dog
X9DRW-3F/X9DRW-iF Connectors
Description
Backplane COM Port1/Front Accessible COM2 Header
CPU/System Fan Headers
Intel PCH SATA Connectors 0~5
Onboard Battery (See Chpt. 3 for Used Battery Disposal)
Speaker/Power LED Connector (Pins 1~3: PWR LED, Pins
6~7: Onboard Buzzer/Pins 4~7: External Speaker)
Front Panel Control Header
4-pin External BMC I
Chassis Intrusion
Port80 Header
Overheat/Fan Fail LED
Power Supply SMBbus I
ATX 24-Pin Power Connector (See Warning on Pg. 1-6)
12V 8-Pin Power Connectors (See Warning on Pg. 1-6)
12V 4-Pin Power Connector (See Warning on Pg. 1-6)
SATA DOM (Device_On_Module) Power Connector
Standby Power Connector
G-bit Ethernet Ports 1/2
IPMI_Dedicated LAN
Serial_Link SATA/SCU Connections 0~3, 4~7 (for X9DRW-
3F), SCU 0~3 (for X9DRW-iF)
Onboard Buzzer (Internal Speaker)
SMC-Proprietary SPEC Slot (See Note 1 below.)
SMC-Proprietary PCI-E 3.0 x16 + x16 Add-on Card Slot
(Left) (See Note 1 below.)
SMC-Proprietary SPEC Slot (See Note 1 below.)
SMC-Proprietary PCI-E 3.0 x16 Add-on Card Slot (Right)
(See Note 2)
1-5
Chapter 1: Overview
Pins 1-2 (Normal)
Pins 1-2 (Reset)
C Header (for an IPMI Card)
2
C Header
2