Motherboard Features - Supermicro X9DRW-3F User Manual

Motherboard Features

CPU
Memory
Chipset
Expansion
Slots
Graphics
Network
I/O Devices
•
Dual Intel E5-2600(v2) Series Processors (Socket
®
R LGA 2011); each processor supports two full-width
Intel QuickPath Interconnect (QPI) links of up to 8.0
GT/s per QPI link and with data transfer rate of up to
16 GB/s direction peak bandwidth per port.
Note: For Intel E5-2600(v2) processor support,
BIOS version 3.0 or above is required.
•
Integrated memory controller supports up to 1 TB
of Load Reduced (LRDIMM), 512 GB of Registered
(RDIMM) or 128 GB of Unbuffered (UDIMM) ECC/
Non-ECC DDR3 800/1066/1333/1600/1866 MHz
240-pin 4-channel memory modules in 16 DIMM
slots.
Note 1: 1866 MHz memory speed is dependent
on Intel E5-2600v2 CPUs.
Note 2: For the latest memory updates, please
refer to the Tested Memory List posted on our
website (http://www.supermicro.com/products/
motherboard).
•
Virtualization: VT-x, VT-d, and VT-c
•
Intel® PCH 606/602 Chipset
•
One (1) SMC-Proprietary PCI-E 3.0 x16 slot (Right)
(SXB2) (See Note 2 on Page 1-5),
•
One (1) SMC-Proprietary PCI-E 3.0 x16 + x16 slot
(Left) (SXB1B) (See Note 1 on Page 1-5),
•
Two (2) SMC-Proprietary SPEC slot (SXB1A/
SXB1C) (See Note 1 on Page 1-5.)
•
Renesas BMC Video Controller
•
One Intel I350 Gigabit Dual-Channel Ethernet Con-
troller for LAN1/LAN2 ports.
•
Renesas Baseboard (BMC) Controller (SH7757)
supports IPMI_LAN 2.0
SATA Connections
•
SATA Ports
•
R A I D ( W i n -
dows)
1-7
Chapter 1: Overview
Six (6) SATA ports total: two
SATA 3.0 and four SATA 2.0
ports
RAID 0, 1, 5, 10