Onboard Led Indicators; Glan Leds; Ipmi_Dedicated_Lan Leds - Supermicro X9DRW-3F User Manual

2-9

Onboard LED Indicators

GLAN LEDs

The LAN 1/2 ports are located on the IO
Backplane. Each Ethernet LAN port has
two LEDs. The Yellow LED on the right
indicates activity. The Link LED on the left
may be green, amber or off to indicate the
speed. See the tables on the right for more
information.

IPMI_Dedicated_LAN LEDs

In addition to the Gigabit Ethernet ports,
an IPMI Dedicated LAN is also located
above the Backplane USB ports 0/1 on the
motherboard. The amber LED on the right
indicates activity, while the green LED on
the left indicates the speed of the connec-
tion. See the table on the right for more
information.
COM2
BMC
CTRL
JI2C1 JVRM_I2C1
JPG1
BIOS
JVRM_I2C2
JBT1 PCH
JBAT1
SATA/SCU4~7 SATA/ SCU0~3
JF1
JD1
1
JSM1
JSM2
JL1
VGA
UID
JUIDB
LAN
CTRL
LAN1
LAN2 USB2/3
CPU2
CLOSE 1st
OPEN 1st
X9DRW-3F/iF
Rev.1.02
CPU1
CLOSE 1st
OPEN 1st
JVR1
FAN3
2-41
Link LED
Rear View (when facing the
rear side of the chassis)
GLAN Activity Indicator (Right)
Color
Yellow
GLAN Link Indicator (Left)
LED Color
Off
Green
Amber
LAN 1/LAN 2
Link LED
IPMI LAN
IPMI LAN Link LED (Left) &
Activity LED (Right)
(X8ST3-F)
Link (Left)
Activity (Right)
COM1
USB0/1
PHY
IPMI-LAN JPW4
JPW3
SP1
JPW2
FAN1
Chapter 2: Installation
Activity LED
LED Settings
Status Definition
Flashing Active
LED Settings
Definition
No Connection or 10 Mbps
100 Mbps
1 Gbps
IPMI LAN
Activity LED
Color/State Definition
Green: Solid 100 Mbps
Amber: Solid 1 Gbps
Amber: Blinking Active
A. Ethernet Port
LEDs
B. IPMI LAN LEDs
B
A