External Ports - Fujitsu D1919 Technical Manual

Interfaces and connectors
3.7.1

External ports

Figure 6: External ports of the system board D1919
1 = PS/2 mouse connector
2 = serial interface COM2
3 = USB ports 0 and 1
4 = LAN connector
The serial interface COM1 can be used as default interface or to communicate
with the BMC.
LAN connector
On this system board you will find a Broadcom LAN controller BCM5721. This
LAN controller supports the transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s.
The LAN controller supports WOL function through Magic Packet™.
It is also possible to boot a device without its own boot hard disk via LAN. Here
Intel PXE is supported.
The LAN port serves as management interface and is prepared for
RemoteView.
The LAN controller connectors are equipped with two LEDs (light emitting
diode) indicating the transfer rate and the activity.
22
1 2
7 6
3
5
5 = VGA port
6 = serial interface COM1
7 = PS/2 keyboard connector
A26361-D1919-Z120-1-7419
Features
4