Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu D1451
Summary of Contents for Fujitsu D1451
- Page 1 COMPONENTS Technisches Handbuch / Technical Manual Mainboard D1451...
- Page 2 Please contact: · your sales partner · your sales outlet You will find further information in the manuals "Safety" and "Ergonomics". The latest information and updates (e. g. BIOS update) on our mainboards can be found on the Internet under: http://www.fujitsu-siemens.com/mainboards...
- Page 4 Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH A26361-D1451-Z120-1-6319 Bestell-Nr./Order No.: Printed in the Federal Republic of Germany AG 0902...
- Page 5 German English Mainboard D1451 Français Technisches Handbuch Technical manual Ausgabe September 2002 September 2002 edition...
- Page 6 All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2002 All rights, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole, are reserved.
-
Page 7: Übersicht/Overview Mainboard
Power On/Off Sleep LED Power On Sleep LED 1) 3) AUDIO HD-LED Reset Speaker SCSI LED Input 1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible PowerOn LED II A26361-D1451-Z120-1-6319 Umschlag/Cover... -
Page 9: Table Of Contents
Contents Übersicht/Overview mainboard D1522/D1521................1 Mainboard D1451 ..........................1 Notational conventions ......................1 Important notes..........................2 Information about boards ......................2 List of features...........................3 Special technical features – special features ................4 Brief instructions on installing mainboard ..................5 Prior to installation ........................5 Interfaces and connectors ......................7 External ports ............................7... -
Page 11: Übersicht/Overview Mainboard D1522/D1521
Mainboard D1451 Your mainboard is available in different configuration levels. Depending on the configuration chosen, some of the hardware components described may not be available on your mainboard. Further information Information on the BIOS Setup and additional descriptions of the drivers are contained: ·... -
Page 12: Important Notes
· Remove the power plug from the mains supply before inserting or removing boards containing ESDs. · Always hold boards with ESDs by their edges. · Never touch pins or conductors on boards fitted with ESDs. 2 - English A26361-D1451-Z120-1-6319... -
Page 13: List Of Features
SmartCard Reader Support (USB / serial) Temperature monitoring System Monitoring ü Fujitsu Siemens Computers Keyboard Power Button Support Internal ports DIMM Sockets (DDR SDRAM, PC2700/2100) AGP Slot (2/4x, 32 bit, 66 MHz, 1.5 V) PCI slot (32-bit, 33 MHz, 5 V and 3.3 V) CNR Slot (Type A, AC‘97 only) -
Page 14: Special Technical Features - Special Features
If an error occurs during a BIOS update (e.g. due to a power failure), the system BIOS will be destroyed. All Fujitsu Siemens Computers mainboards are equipped with a recovery BIOS. With it a destroyed BIOS can easily be restored. Exact instructions are provided in the chapter "BIOS Recovery –... -
Page 15: Brief Instructions On Installing Mainboard
(power supply unit, case connections such as ATX on/off switch, hard disk or floppy disk drive). You should not install additional cards and devices until this minimum configuration successfully boots (see chapter entitled "Add-on modules / Upgrading". English - 5 A26361-D1451-Z120-1-6319... -
Page 16: Driver Installation
Connect the plugs for the power supply, control panel and drives to the corresponding connections on the mainboard. Driver installation Ê Install the drivers for the chipset. The drivers are contained on the included "Drivers & Utilities" CD. Please refer to chapter "Drivers" for a description of installing drivers. 6 - English A26361-D1451-Z120-1-6319... -
Page 17: Interfaces And Connectors
It is also possible to boot a device without its own boot hard disk via LAN. Here bootix® LAN BootP or bootix® PXE are supported. The LAN RJ45 connector has two LEDs (light emitting diodes). 1 = a connection exists (e.g. to a hub). 2 = Link Mode: the LAN connection is active. English - 7 A26361-D1451-Z120-1-6319... -
Page 18: Internal Ports And Connectors
An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for the ultra ATA/66 or ultra ATA/100 mode. Ê Connect the end of the cable marked with blue to the mainboard. 8 - English A26361-D1451-Z120-1-6319... -
Page 19: Pin Assignment Of Internal Ports
+3.3 V (P3V3P) -12 V (P12VN) +5 V (VCC) PS on (low asserted) +5 V (VCC) Powergood (high asserted) -5 V (P5VN) +5 V Auxiliary (VCC Aux) +5 V (VCC) +12 V (P12VP) +5 V (VCC) English - 9 A26361-D1451-Z120-1-6319... - Page 20 Indicates the system state APM or ACPI together with the Power-On LED (see chapter entitled "APM and ACPI system status, energy-saving modes"). Power On LED II Note Power On LED (Anode) Power On LED (Anode) Power On LED (Cathode) 10 - English A26361-D1451-Z120-1-6319...
- Page 21 Controlled Fan voltage (0 V, +6 V ... +12 V, max. 1 A) or fix Fan voltage (+12 V, max. 1 A) Fan sense CD-ROM audio Signal Left CD audio input CD GND CD GND Right CD audio input English - 11 A26361-D1451-Z120-1-6319...
- Page 22 Left line return Audio S/PDIF Signal SPDIF out Zweite Serielle Schnittstelle / Serial port 2 (external via special cable) Signal Signal DCD 2 DSR 2 SIN 2 RTS 2 SOUT 2 CTS 2 DTR 2 RI 2 12 - English A26361-D1451-Z120-1-6319...
- Page 23 +12 V Lüfter 1 / Fan 1 (system fan - supervised) Signal Controlled Fan voltage (0 V, +6 V ... +12 V, max. 1 A) or fix Fan voltage (+12 V, max. 1 A) Fan sense English - 13 A26361-D1451-Z120-1-6319...
-
Page 24: Settings With Switches And Jumpers
The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS- Diskette" restores the System BIOS on the mainboard. Normal operation (default setting). Reserved - switch 3 and switch 4 Switch 3 and 4 are reserved. 14 - English A26361-D1451-Z120-1-6319... -
Page 25: Add-On Modules / Upgrading
(A) with regard to the position (4). The angled corner of the processor can also be at a different location than shown in the illustration. Ê Push the lever back down until it clicks into place (5). English - 15 A26361-D1451-Z120-1-6319... -
Page 26: Mounting Heat Sink
Depending on the processor variant, clips may also be supplied for mounting the heat sink that fix it in place. Ê When you have mounted the optional fan, connect the fan plug to the corresponding connection on the mainboard. 16 - English A26361-D1451-Z120-1-6319... -
Page 27: Upgrading Main Memory
128, 256, 512 or 1024 Mbyte for one socket A current list of the memory modules recommended for this mainboard is available on the Internet at: www.fujitsu-siemens.de/mainboards. At least one memory module must be installed. Memory modules with different memory capacities can be combined. -
Page 28: Adding Pci Cards
Monofunctional expansions cards: Standard AGP and PCI expansion cards require a maximum of one interrupt, which is called the PCI interrupt INT A. Expansion cards that do not require an interrupt can be installed in any desired slot. 18 - English A26361-D1451-Z120-1-6319... -
Page 29: Replacing Lithium Battery
Do not throw lithium batteries into the household waste. They must be disposed of in accordance with local regulations concerning special waste. Ensure that you insert the battery the right way round. The plus pole must be on the top! English - 19 A26361-D1451-Z120-1-6319... - Page 30 Press the locking lug in the direction of the arrow; the battery jumps somewhat out of the holder (1). Ê Remove the battery (2). Ê Insert a new lithium battery of the same type into the socket (3). 20 - English A26361-D1451-Z120-1-6319...
-
Page 31: Bios Update
BIOS update BIOS update When should a BIOS update be carried out? Fujitsu Siemens Computers makes new BIOS versions available to ensure compatibility to new operating systems, new software or new hardware. In addition, new BIOS functions can also be integrated. -
Page 32: Microcode Update
Safety for processor on Fujitsu Siemens Computers mainboards If the processor uses an old or incorrect microcode, error-free operation cannot be ensured. Fujitsu Siemens Computers has therefore implemented a function on its mainboards that interrupts the booting process if no suitable microcode is available for the installed processor. -
Page 33: Drivers
Insert the CD Drivers & Utilities Collection into the CD ROM drive. Ê If the CD does not start automatically, run the START.EXE programme in the main directory of the CD. Ê Select DeskUpdate - Fully automatic installation. Ê Follow the instructions on screen. English - 23 A26361-D1451-Z120-1-6319... -
Page 34: Annex
Mainboard current requirement You require a Pentium4 power supply nit as per the ATX12V specification for this mainboard. If you do not have a PC from Fujitsu Siemens Computers, make sure that the power supply unit provides the required amperages. -
Page 35: Apm And Acpi System Status, Energy-Saving Modes
* G = Global status; S = System status The power supply unit must provide sufficiently loadable 5 V standby voltage. To use the WOL functionality the power supply must provide a 5 V auxiliary voltage (5VSB) of at least 1 A. English - 25 A26361-D1451-Z120-1-6319... -
Page 36: Mainboard Revision And Bios Version
The BIOS version can be displayed in the BIOS Setup. Ê Press [F2] during booting to open the BIOS Setup. Ê Press [F1]. The BIOS version is specified on the displayed information page under the entry BIOS Release. 26 - English A26361-D1451-Z120-1-6319... -
Page 37: Error Messages
Available CPUs do not support the same bus frequency – System halted! Memory type mixing detected Non Fujitsu Siemens Memory Module detected – Warranty void There are more than 32 32 RDRAM devices in the system Check whether the system configuration has changed. If necessary, correct the settings. - Page 38 Keyboard error Check that the keyboard is connected properly. Keyboard error nn nn Stuck Key Release the key on the keyboard (nn is the hexadecimal code for the key). 28 - English A26361-D1451-Z120-1-6319...
- Page 39 = Group number x = Number of SEs found on the communication bus y = Number of SEs entered in Number of connected SE k1, k2 ... = Device ID of the storage extensions found English - 29 A26361-D1451-Z120-1-6319...
-
Page 40: Dos Error Messages
Critical error logged to server management processor - system halted If the NMI button of the control panel is pressed, then the following error text is output on the screen: Frontpanel NMI activated - system halted 30 - English A26361-D1451-Z120-1-6319... -
Page 41: Smartcard Reader - Error Messages
You have exceeded the maximum number of failed attempts to enter the PIN. The Sicrypt SmartCard is blocked. Enter the administrator PIN to re-activate the Sicrypt SmartCard. You must then enter a new User PIN to restart the system. English - 31 A26361-D1451-Z120-1-6319... -
Page 42: Glossary
Universal Serial Bus GMCH Graphics and Memory Controller Video Graphic Adapter Graphics Performance Wake On LAN Accelerator Inter Integrated Circuit IAPC Instantly Available Power Managed Desktop PC Design I/O Controller Hub Intelligent Drive Electronics IPSEC Internet Protocol Security 32 - English A26361-D1451-Z120-1-6319...