SCSI/IME configuration program
Configuring IME
To configure IME select your adapter in the menu by using the [arrow keys].
Press the [Enter] key to change into the menu Adapter Properties.
From there select the entry RAID Properties and press the [Enter] key to
change into the menu RAID Properties.
In this menu you can configure the IME.
I
Detailed instruction on the configuration of IME are contained in the IME
User's Guide.
There can be only one RAID configured on the two channel SCSI
controller. All the hard disks of this RAID must be connected to channel
A.
The administration of the RAID system can be set later by a tool in your
operating system (see therefore the documentation "Global Array
Manager").
A26361-D1919-Z120-1-7419
29