Fujitsu D1919 Technical Manual page 38

Global Properties
Pause When Boot Alert
Displayed
Boot Information Display
Mode
Negotiate With Devices
Video Mode
Support Interrupt
34
The default setting is No.
With this setting the boot process is not interrupted by error
messages.
The default setting is Verbose.
While the system is booting, the SCSI controller's BIOS re-
ports which devices are connected to the SCSI bus..
Further setting is Terse (no messages are shown)
)
The default setting is Supported.
With this setting the SCSI controller checks the properties
of the SCSI devices and defines the settings.
The default setting is Color.
This setting defines whether the menus of the SCSI confi-
guration program are displayed in colour or in black and
white.
The default setting is Hook interrupt, the Default.
This setting defines the interrupt behaviour.
SCSI/IME configuration program
A26361-D1919-Z120-1-7419