Connecting External Devices; External Ports - Fujitsu D2778 Technical Description

32 – English

Connecting External Devices

Connecting external devices to the motherboard is an easy task. The standard devices you should
expect to plug into the motherboard are keyboards, mouse, and printer cables. The following
diagram will detail the ATX port stack for the following board:
PS2 SPDIF
Fire
wire

External ports

The location of the external connections of your mainboard is specified at the beginning of the
manual.
Firewire, white
LAN
LAN port (RJ-45)
Audio input (Line in), light blue
Audio output (Line out), light green
Serial interface, turquoise
Earphone / SPDIF, yellow
The LAN RJ45 connector has two LEDs (light emitting diodes).
Left LED
Green: Link established
Blinking green: LAN connection is active
While the ports have been created to accept connectors in only one direction, make sure
i
to be careful when inserting connectors. At times, attaching connectors in the incorrect
orientation can damage, bend and or break the pins.
32
Line
-in
-out
LAN
MIC
USB
COM1
4xUSB Port
D2778
x8 (x4
electr.)
x16
Gen1
PS/2 mouse port, green
Microphone jack (mono), pink
USB - Universal Serial Bus, black
PS/2 keyboard, blue
e-SATA-Anschluss
Right LED
Off: 10 Mbit/s
Green: 100 Mbit/s
Yellow: 1000Mbit/s
Mainboard D2778
x8 (x4
PCI
electr.)
x16
Gen2
Fujitsu Technology Solutions
PCI