Fujitsu D1919 Technical Manual page 32

Calling the SCSI/IME configuration program
Start the PC, if the following message appears, press the key combination
[CTRL] and [C]:
Following hint appears next:
In the first menu all available U320 SCSI controllers and the RAID status (if IME
configuration is existing) are displayed.
The two channel SCSI controller is displayed like two separate controllers. The
first adapter displayed corrensponds to SCSI channel A, the second adapter
corresponds to SCSI channel B.
Terminating the SCSI/IME configuration program
Depending on the current menu level, you can display the previous menu by
pressing the [ESC] key. If you have made changes in the current menu you will
be prompted to store them.
To quit the configuration program press the [ESC] key until a corresponding
message is displayed.
28
SCSI/IME configuration program
A26361-D1919-Z120-1-7419