Fujitsu D1919 Technical Manual page 8

For tx200 s2
Table of Contents

Advertisement

Notes on safety
V
Components can become very hot during operation. Ensure you do
not touch components when making extensions to the system board.
There is a danger of burns!.
Transmisson lines to peripheral devices must be adequately shielded.
To the LAN wiring the requirements apply in accordance with the
standards EN 50173 and EN 50174-1/2. As minimum requirement
the use of a protected LAN line of category 5 for 10/100 MBps
Ethernet, and/or of category 5e for Gigabit Ethernet is considered.
The requirements of the specification ISO/IEC 11801 are to be
considered.
Never connect or disconnect data transmission lines during a storm
(lightning hazard).
Batteries
V
CAUTION!
Incorrect replacement of lithium battery may lead to a risk of
explosion. The batteries may only be replaced with identical batteries
or with a type recommended by the manufacturer.
It is essential to observe the instructions on page 37.
Do not throw batteries into the trash can. They must be disposed of
in accordance with local regulations concerning special waste.
The battery must be disposed of in accordance with local regulations
concerning special waste.
All batteries containing pollutants are marked with a symbol (a
crossed-out garbage can). In addition, the marking is provided with
the chemical symbol of the heavy metal decisive for the classification
as a pollutant:
Cd Cadmium
Hg Mercury
Pb Lead
4
Important notes
A26361-D1919-Z120-1-7419

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents