External Ports - Fujitsu D2109 Technical Manual

Interfaces and connectors
3.7.1

External ports

10
Figure 6: External ports of the system board D2109
1 = PS/2 mouse connector
2 = serial interface COM2
3 = USB ports 3 and 4
4 = LAN connector 2
5 = LAN connector 1 (service LAN)
The serial interface COM1 can be used as default interface or to communicate
with the iRMC.
LAN connectors
On this system board you will find two LAN controllers: a single-channel Gigabit
LAN controller and a service LAN controller.
The single-channel Gigabit LAN controller supports the transfer rates of
10 Mbit/s, 100 Mbit/s and 1 Gbit/s. The Service LAN controller supports the
transfer rates of 10 Mbit/s and 100 Mbit/s.
The LAN controllers support WOL function through Magic Packet™.
It is also possible to boot a device without its own boot hard disk via LAN. Here
Intel PXE is supported.
The LAN1 port serves as management interface and is prepared for
RemoteView.
26
1
2
9 8 7
Technical Manual
3
6
6 = VGA port
7 = serial interface COM1
8 = PS/2 keyboard connector
9 = ID LED
10 = Global Error LED
Features
5 4
D2109 (TX200 S3)