Connecting External Devices; External Ports - Fujitsu D3128 Technical Description

Mainboard D3128

Connecting External Devices

Connecting external devices to the motherboard is an easy task. The standard devices you should
expect to plug into the motherboard are keyboards, mouse, and printer cables. The following
diagram will detail the ATX port stack for the following board:
PS2 2x
USB

External ports

The location of the external connections of your mainboard is specified at the beginning of the
manual.
Firewire, white
LAN
LAN port (RJ-45)
Audio input (Line in), light blue
Audio output (Line out), light green
Serial interface, turquoise
Earphone / SPDIF, yellow
The LAN RJ45 connector has two LEDs (light emitting diodes).
Left LED
Green: Link established
Blinking green: LAN connection is active
While the ports have been created to accept connectors in only one direction, make sure to
i
be careful when inserting connectors. At times, attaching connectors in the incorrect
orientation can damage, bend and or break the pins.
Fujitsu Technology Solutions
D3128
Line
-in
- out
LAN
MIC
USB
2x
Port
USB
x16 (x4
x8 (x4 x16
electr.) Gen3 electr.)
Gen2
Gen3 CPU0
CPU0 PCH
PS/2 mouse port, green
Microphone jack (mono), pink
USB 2.0 - Universal Serial Bus, black
USB 3.0 - Universal Serial Bus, blue
PS/2 keyboard, blue
e-SATA-Anschluss
Right LED
Off: 10 Mbit/s
Green: 100 Mbit/s
Yellow: 1000Mbit/s
English - 33
x16 (x4
x8 (x4
electr.) electr.)
PCI
Gen3
Gen3
CPU0 CPU0
PCI
71