Connecting External Devices; External Ports - Fujitsu D3488 Technical Description

Mainboard D3488

Connecting External Devices

Connecting external devices to the motherboard is an easy task. The standard devices you should
expect to plug into the motherboard are keyboards, mouse, and printer cables. The following
diagram will detail the ATX port stack for the following board:
2xUSB

External ports

The location of the external connections of your mainboard is specified at the beginning of the
manual.
Firewire, white
LAN
LAN port (RJ-45)
Audio input (Line in), light blue
Audio output (Line out), light green
Serial interface, turquoise
The LAN RJ45 connector has two LEDs (light emitting diodes).
Left LED
Link established Off:
Blinking green: LAN connection is active
While the ports have been created to accept connectors in only one direction, make sure to
i
be careful when inserting connectors. At times, attaching connectors in the incorrect
orientation can damage, bend and or break the pins.
Fujitsu
Line
LAN
-in
w/
-out
LAN AMT
MIC
USB USB
Port Port
D3488
x8 x16 x8
Gen3 Gen3 Gen3
CPU1 CPU0 CPU0
Earphone / SPDIF, yellow
Microphone jack (mono), pink
USB 2.0 - Universal Serial Bus, black
USB 3.0 - Universal Serial Bus, blue
e-SATA-Anschluss
Right LED
Off: 10 Mbit/s
Green: 100 Mbit/s
Yellow: 1000 Mbit/s
x16 x16 x16
Gen3 Gen3 Gen3
CPU1 CPU0 CPU1
English - 35
PCI-32
73