Lexmark XM1100 Series User Manual page 99

E-mailing
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
Note: To avoid a cropped image, make sure that the size of the original document and the copy paper size are
the same.
3
From the home screen, navigate to:
E-mail > Recipient(s)
4
Type the e‑mail address, or press # and then enter the shortcut number.
To enter additional recipients, touch
add.
Note: You can also enter an e‑mail address using the address book.
5
Touch > E‑mail It.
Sending an e‑mail using a shortcut number
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
Press #, then enter the shortcut number using the keypad, and then touch
To enter additional recipients, touch
add.
4
Touch > E‑mail It.
Sending an e‑mail using the address book
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
, and then enter the e‑mail address or shortcut number that you want to
, and then enter the e‑mail address or shortcut number that you want to
.
99