Skewed Print - Lexmark XM1100 Series User Manual

Troubleshooting
Action
Step 6
a
Redistribute the toner in the imaging unit.
1
Remove the toner cartridge, and then the imaging unit.
2
Firmly shake the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
3
Install the imaging unit, and then the cartridge.
b
Resend the print job.
Is the print still too light?
Step 7
Replace the imaging unit, and then resend the print job.
Is the print still too light?

Skewed print

Action
Step 1
a
Move the width and length guides in the tray to the correct positions
for the size of the paper loaded.
b
Resend the print job.
Is the print still skewed?
Step 2
a
Check if you are printing on a paper that is supported by the tray.
b
Resend the print job.
Is the print still skewed?
Yes No
Go to step 7. The problem is solved.
Contact customer The problem is solved.
support.
Yes No
Go to step 2. The problem is solved.
Contact customer The problem is solved.
support.
280