Lexmark XM1145 E-Mail Manual

Lexmark XM1145 E-Mail Manual

Lexmark xm1145 all in one printer - email guide
Hide thumbs Also See for XM1145:

Advertisement

E-mail Guide
You can send an e-mail from the printer by typing the e-mail address, using a shortcut number, or using the address book.

Sending an e-mail using the printer control panel

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
Note: To avoid a cropped image, make sure that the size of the original document and the copy paper size are the same.
3
From the home screen, navigate to:
E-mail > Recipient(s)
4
Type the e‑mail address, or press # and then enter the shortcut number.
To enter additional recipients, touch
Note: You can also enter an e‑mail address using the address book.
5
Touch
> E‑mail It.
Sending an e‑mail using a shortcut number
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
Press #, then enter the shortcut number using the keypad, and then touch
To enter additional recipients, touch
4
Touch
> E‑mail It.
Sending an e‑mail using the address book
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
, and then enter the e‑mail address or shortcut number that you want to add.
, and then enter the e‑mail address or shortcut number that you want to add.
E-mail Guide
Page 1 of 4
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XM1145 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lexmark XM1145

  • Page 1 E-mail Guide Page 1 of 4 E-mail Guide You can send an e-mail from the printer by typing the e-mail address, using a shortcut number, or using the address book. Sending an e-mail using the printer control panel Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: •...
  • Page 2 E-mail Guide Page 2 of 4 • The ADF indicator light comes on when the paper is loaded properly. If you are loading a document into the ADF tray, then adjust the paper guides. From the home screen, navigate to: E-mail >...
  • Page 3 E-mail Guide Page 3 of 4 Send As This option lets you set the output type for the scan image. Select one of the following: • PDF—Use this to create a single file with multiple pages. Note: PDF is the factory default setting. •...
  • Page 4: Advanced Imaging

    E-mail Guide Page 4 of 4 Scan Preview This option lets you view the first page of the image before it is included in the e-mail. When the first page is scanned, the scanning is paused and a preview image appears. Note: This option appears only when a working printer hard disk is installed.

This manual is also suitable for:

Mx510

Table of Contents