Lexmark XM1100 Series User Manual page 188

Understanding the printer menus
Use
Sides (Duplex)
Off
Long edge
Short edge
JPEG Quality
Best for content
5–90
Text Default
5–90
Text/Photo Default
5–90
Photo Default
5–90
Use Multi‑Page TIFF
On
Off
Scan Bit Depth
1 bit
8 bit
File Name
Custom Job Scanning
On
Off
Scan Preview
On
Off
To
Specify the page orientation of text and graphics.
Notes:
•
Off is the factory default setting.
•
"Long edge" assumes binding along the long edge of the page (left edge for
portrait and top edge for landscape).
•
"Short edge" assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).
Set the quality of a JPEG photo image in relation to file size and quality.
Notes:
•
"Best for content" is the factory default setting.
•
5 reduces the file size, but the quality of the image is lessened.
• 90 provides the best image quality, but the file size is very large.
•
This menu setting applies to all scan functions.
Set the quality of the text in relation to file size and the quality of the image.
Note: 75 is the factory default setting.
Set the quality of a text or photo image in relation to file size and quality.
Note: 75 is the factory default setting.
Set the quality of a photo image in relation to file size and quality.
Note: 50 is the factory default setting.
Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a
multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages,
or multiple TIFF files are created with one file for each page.
Notes:
•
On is the factory default setting.
•
This menu setting applies to all scan functions.
Enable the Text/Photo mode to have smaller file sizes by using 1‑bit images.
Note: "8 bit" is the factory default setting.
Type a base file name.
Note: You can enter a maximum of 53 characters.
Copy a document containing mixed paper sizes in a single copy job.
Note: Off is the factory default setting.
Specify whether a preview appears on the display for scan jobs.
Notes:
•
Off is the factory default setting.
• This menu item appears only when a formatted, working printer hard disk is
installed.
188