Finishing Menu - Lexmark XM1100 Series User Manual

Understanding the printer menus
Use
Download Target
RAM
Flash
Disk
Resource Save
On
Off
Print All Order
Alphabetical
Oldest First
Newest First

Finishing menu

Use
Sides (Duplex)
1 sided
2 sided
To
Set the storage location for downloads.
Notes:
•
RAM is the factory default setting. Storing downloads in the
RAM is temporary.
• Storing downloads in flash memory or on a printer hard disk
places them in permanent storage. Downloads remain in
flash memory or on the printer hard disk even when the
printer is turned off.
•
This menu setting appears only when a formatted, working
flash drive or printer hard disk is installed.
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
job that requires more memory than is available.
Notes:
•
Off is the factory default setting. This sets the printer to
retain the downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
•
On retains the downloads during language changes and
printer resets. If the printer runs out of memory, then
Memory Full [38] appears, and downloads are not
deleted.
Specify the order in which held and confidential jobs are printed
when Print All is selected.
Note: Alphabetical is the factory default setting. Print jobs always
appear in alphabetical order on the printer control panel.
To
Specify whether two‑sided (duplex) printing is set as the user default setting for all
print jobs.
Notes:
•
"1 sided" is the factory default setting.
•
You can set two‑sided printing from the software program.
For Windows users:
Click File > Print, and then click Properties, Preferences, Options, or Setup.
For Macintosh users:
Choose File > Print, and then adjust the settings from the print dialog and
pop‑up menus.
192