Lexmark XM1100 Series User Manual page 177

Understanding the printer menus
Use
Forward to Shortcut
Block No Name Fax
Off
On
Banned Fax List
Fax Log Settings menu items and their descriptions
Use
Transmission Log
Print log
Do not print log
Print only for error
Receive Error Log
Print Never
Print on Error
Auto Print Logs
On
Off
Log Paper Source
Tray [x]
Manual Feeder
Logs Display
Remote Station Name
Dialed Number
Enable Job Log
On
Off
Enable Call Log
On
Off
To
Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS,
or eSF).
Note: You can enter up to 16 characters.
Enable blocking of incoming faxes sent from devices with no station ID or fax ID
specified.
Note: Off is the factory default setting.
Enable the list of blocked fax numbers stored in the printer.
Note: You can enter up to 512 characters.
To
Enable printing of a transmission log after each fax job.
Note: "Print log" is the factory default setting.
Enable printing of a receive error log following a receive error.
Note: Print Never is the factory default setting.
Enable automatic printing of fax logs.
Notes:
•
On is the factory default setting.
• Logs print after every 200 fax jobs.
Specify the source of the paper used for printing logs.
Note: Tray 1 is the factory default setting.
Specify whether printed logs display the dialed number or the station name or fax
name returned.
Note: Remote Station Name is the factory default setting.
Enable access to the Fax Job log.
Note: On is the factory default setting.
Enable access to the Fax Call log.
Note: On is the factory default setting.
177