Appendix B. System Cleaning Information; Customer User Product Care Procedures - IBM 4613 SurePOS Installation And Operation Manual

July 27, 2007 - Approval Draft

Appendix B. System Cleaning Information

Prior to cleaning any of the SurePOS 100 parts or components, make sure to
power down the system and unplug all power cables from electrical outlets.

Customer User Product Care Procedures

Owners and users periodically should inspect their system unit and its components
for cleanliness and perform the following procedures based on usage and
environmental characteristics.
System Unit
1. Vacuum the ventilation grills on the front and right side of the base unit. The
2. Clean the plastic covers with a cloth moistened with water.
3. When greater cleaning is required, use a cloth moistened with warm water and
4. When extensive cleaning is required, use a cloth moistened with a solution of
5. Make sure the unit is dry prior to powering the unit back on.
Monochrome Display and Color LCD Display
Follow these guidelines:
1. Use a soft, dry cloth with rubbing alcohol on any non-abrasive, non-alkaline,
2. Wipe gently across the surface.
3. Allow a few minutes for the surface to dry before using.
Keyboard
1. Vacuum the keyboard.
2. Wipe the keyboard cover and the keycaps with a cloth moistened with water.
3. Make sure the keyboard is dry prior to powering the unit back ON.
© Copyright IBM Corp. 2007
right-side vent provides cooling for the power supply while the front vent
provides cooling for the rest of the unit components.
a small amount of mild, abrasive-free hand soap, or a dish washing detergent
used for washing dishes by hand. After cleaning, use a cloth moistened with
water to remove the soap residue.
rubbing alcohol (isopropyl alcohol) and water.
Note: Do not apply the cleaning solution directly to the product. Always apply or
spray the cleaner on a clean cloth and then wipe the surface of the
product.
non-ammonia based cleaner.
Note: Do not apply cleaning solution directly to the screen. Always apply or
spray the cleaner on a clean cloth and then wipe the screen.
Note: Do not apply cleaning solution directly to the cover or keys. Always apply
or spray the cleaner on a clean cloth and then wipe the cover and
keycaps.
45