IBM 4613 SurePOS Installation And Operation Manual page 26

Installation Instructions
5. Select the desired post option (short, tall, or both) that you want to install. To
Figure 7. Customer Display Tower
6. Locate the customer display cable G and insert the smaller of the two customer
14
4613 SurePOS 100 Point-of-Sale Terminal: Installation and Operation Manual
combine both posts for additional display height, press the eight-tabbed post
end into the non-tabbed end of the other post. The upper post can be either the
short post or the tall post.
Line up the rib F of one post, as shown in the following figure, into the slot of
the other post.
A
B
C
D
Reference
A
B
C
D
E
F
G
display cable connectors B through the bottom of the slot E on the base of the
SurePOS chassis up through assembled post option D and the display yoke C .
Insert the connector into the socket in the display head A .
July 27, 2007 - Approval Draft
Description
Display Head
Connector
Display Yoke
Post Option
Slot
Rib
Customer Display Cable
G
F
E