If You Replace The Wireless Lan Pcb - Brother DCP-7030 Service Manual

2.

IF YOU REPLACE THE WIRELESS LAN PCB

<What to do when replacing the wireless LAN PCB>
• Backup to the Main PCB of the Wireless LAN PCB Information (MFC 7840W only)
<Which parts to use>
WIRELESS LAN PCB ASSY
■ Backup to the Main PCB of the Wireless LAN PCB Information
(MFC 7840W only)
The main PCB stores a part of the information of EEPROM on the wireless LAN PCB. It is
necessary to write the information of EEPROM on the wireless LAN PCB.
(1) Turn the power supply of the machine on while pressing the
same time. (Hold on the
displayed on the LCD. When continue pressing the
START" is displayed on the LCD. AT this time, release the two buttons.
(2) After having passed for a while, "WLAN MODULE OK" is displayed on the LCD. Turn
the power supply of the machine off after two indications are displayed.
and OK button while pressing it.) "PLEASE WAIT" is
4-11
and OK button at the
and OK button, "CHECK
Confidential