Brother DCP-7030 Service Manual page 299

• Selector 8: Switching between DTMF and FSK for caller ID reception (Not used.)
If a caller ID (number display) cannot be received, switch from DTMF to FSK. This
operation can also be performed by means of the menu, by switching between DTMF and
FSK.
<WSW55>
Selector No.
1
Interval of time required for
I the developing bias voltage
correction (hour)
8
The setting example of the selector number is as follows;
No.1 2 3 4 5 6 7 8
0 0 0 0 0 0 0 0 : The developing bias voltage correction is performed on each print
0 0 0 1 1 0 0 0 : The developing bias voltage correction is performed when a print
0 0 0 1 0 0 1 0 : The developing bias voltage correction is performed when a print
1 1 1 1 1 1 1 1 : The developing bias voltage correction is not performed.
• Selector 1 to 8: Interval of time required for the developing bias voltage correction
To keep the density of four colors evenly, the developing bias voltage correction is
performed when a print job occurs at specified time or later.
<WSW56>
Selector No.
PS emulation function setting
1
(Not used.)
2 Not used.
"Last Job Reprint" function
3
setting
4
I Not used.
8
• Selector 3: "Last Job Reprint" function setting
Setting this selector to "0" makes the machine not to reprint the "Last Job Print" data such
as confidential document in order to prevent the misuse.
Function
255 (0xFF):
job.
job occurs after 24 hours (default value) or later.
job occurs after 72 hours or later.
Function
App. 1-60
Setting and Specifications
0: The developing bias voltage
correction is performed on each
print job.
1-72: The developing bias voltage
correction is performed when a
print job occurs at specified
time or later.
73-254: Not allowed to set.
The developing bias voltage
correction is not performed.
Setting and Specifications
0: Invalid 1: Valid
0: Invalid 1: Valid
Confidential