Brother DCP-7030 Service Manual page 216

Function
SLEEP TIME
PAGE PROTECTION
EMULATION
AUTO I/F TIME
MEDIA TYPE
PAPER (SIZE)
COPIES
ORIENTATION
P-POS X-OFFSET
P-POS Y-OFFSET
Set value
0 to 99 Configure the setting for the time until shift to the
Sleep Time. Change the setting of the Menu
(Function).
(Default : 5)
Off/Letter/Legal/A4/ Configure the setting to protect the page memory,
Auto when recording in PC. Set in the PCL-Core. There is
not the influence of the memory management
problem of the MFC.
(Default : OFF)
Auto/HP-LaerJet/ Configure the setting for the Emulation. Charge the
BR-Script setting of the Menu (Function). When the data
include the ENTER LANGUAGE, the setting
becomes effective. And this setting is ignored.
(Default : AUTO)
1 to 99 Configure the setting for the I/F open time. The
function is in the PC-Print. When the PC-Scan/
Remote-setUp works on the way, the setting
becomes invalid.
(Default : 5)
Thin/Plain/Thick/ Configure the setting for the type of the recording
Thicker/ paper. Effective for the print from the PC. When set
Trancparency the type of the recording paper on the PC, the setting
Recycled/Bond/ becomes effective. And this setting is ignored. The
Envlopes/EnvThin/ default value is different by the country setting in the
EnvThick Laser product. As for the basics, the Plain is the
default value. However, the Thin may be became the
default value in JPN/CHN.
(Default : Plain/Thin (change in each country))
Letter/Legal/A4/ Configure the setting for the size of the recording
Executive/B5/JISB5/ paper. Does not set the Paper Size of the Menu, set
A5/B6/A6/Monarch/ the drawing size of the PC-Print. When set the size
C5/COM10/DL/DLL/ of the recording paper on the PC, the setting
A4Long/PostCard/ becomes effective. And this setting is ignored. The
Folio default value is different by the country setting in the
Laser product. US/CAN are the Letter, and others
are the A4.
(Default : Letter/A4 (change in each country))
1 to 999 Configure the setting for the number of the copies.
Effective for the print from the PC. When set the
number of the copies on the PC, the setting becomes
effective. And this setting is ignored.
(Default : 1)
Portrait/Landscape Configure the setting for the print direction. Effective
for the print from the PC.
(Default : Portrait)
-500 to 500 Configure the setting for the offset print position of
the landscape orientation. Effective for the print from
the PC. When set the X-Offset on the PC, the setting
becomes effective. And this setting is ignored.
(Default : 0)
-500 to 500 Configure the setting for the offset print position of
the portrait orientation. Effective for the print from the
PC. When set the Y-Offset on the PC, the setting
becomes effective. And this setting is ignored.
(Default : 0)
5-20
Problem
Confidential