DCP-7030 DCP-7040 DCP-7045N Before you can use the machine, you must set up the hardware and install the driver. Please read this ‘Quick Setup Guide’ for proper set up and installation instructions. STEP 1 Setting Up the Machine STEP 2 Installing the Driver &...
All other trademarks are the property of their respective owners. Compilation and Publication Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice.
Table of Contents Safety Precautions To use the machine safely ........................... 2 Regulations ..............................3 STEP 1 – Setting Up the Machine Installing the drum unit and toner cartridge assembly.................. 4 Loading paper in the paper tray ........................5 Install the power cord ........................... 6 Set your country (DCP-7040 and DCP-7045N) ..................
Safety Precautions To use the machine safely Please keep these instructions for later reference and read them before attempting any maintenance. Warning Before cleaning the inside of the machine, first unplug the telephone DO NOT handle the plug with wet hands. line cord, and then the power cord from the electrical socket.
Wave length: 780 - 800 nm Output: 10 mW max. ® As an ENERGY STAR Partner, Brother Industries, Laser Class: Class 3B Ltd. has determined that this product meets the ® ENERGY STAR guidelines for energy efficiency.
STEP 1 Setting Up the Machine Put the drum unit and toner cartridge assembly Installing the drum unit and into the machine. toner cartridge assembly Improper Setup DO NOT connect the interface cable. Connecting the interface cable is done when installing the driver.
Setting Up the Machine Put paper in the paper tray. Make sure that the Loading paper in the paper paper is flat in the tray and below the maximum tray paper mark (1). Pull the paper tray completely out of the machine.
STEP 1 Setting Up the Machine Install the power cord Selecting your language Make sure that the machine’s power switch is After turning the power switch on, the LCD off. Connect the AC power cord to the machine. shows: Plug the AC power cord into an AC outlet. Turn Select Language the power switch on.
Follow the instructions on this page for your operating system and interface. For the latest drivers, documentation, and to find the best solution for your problem, access the Brother Solution Center directly from the CD-ROM / Driver or visit http://solutions.brother.com/.
• Please close any applications running before Note installing the MFL-Pro Suite. (DCP-7045N only) • The supplied CD-ROM includes ScanSoft™ If you want to install the PS driver (Brother’s PaperPort™ 11SE. This software supports BR-Script Driver), choose Custom Install and ® Windows 2000 (SP4 or greater), XP (SP2 or then follow the on-screen instructions.
Plug the AC power cord into an AC outlet. Turn the power switch on. The installation of the Brother drivers will automatically start. The installation screens appear one after another, please wait for a while.
Turn off and unplug the machine from the AC Note outlet. If you want to install the PS driver (Brother’s Connect the network interface cable to the BR-Script Driver), choose Custom Install and machine, and then connect it to your network.
Installing the Driver & Software ® Windows The installation of the Brother drivers will automatically start. The installation screens appear one after another, please wait for a while. Improper Setup DO NOT try to cancel any of the screens during this installation.
Restart to finish installing the software. Note For Mac OS X 10.2.0 to 10.2.3 users, upgrade to The Brother software will search for the Brother Mac OS X 10.2.4 or greater. (For the latest device. During this time the following screen information for Mac OS X, visit will appear.
Go to step 7. Double-click the Start Here OSX icon to install. Follow the on-screen instructions. The Brother software will search for the Brother device. During this time the following screen will appear. • If you want to use the machine’s Scan key to scan over the network you must check the Register your computer with the "Scan To"...
Installing the Driver & Software Macintosh When this screen appears, click OK. For Mac OS X 10.3.x or greater users: The MFL-Pro Suite, Brother printer driver, scanner driver and Brother ControlCenter2 have been installed and the installation is now complete.
Consumables and Options Consumables When the time comes to replace consumable items, an error message will be indicated on the LCD. For more information about the consumables for your machine, visit us at http://solutions.brother.com or contact your local Brother reseller. Toner Cartridge...