3.7
Curl in the paper
Step
Fuser unit
1
pressure is high
(1) Turn the Nip release lever of right and left to the direction of the arrow.
(2) Hold and turn the PR stopper plate of right and left.
(3) Print it again, and check that the curl in the paper occurs.
(4) When there seems to be still the curl, replace the position of the pressure roller again.
NIP RELEASE LEVER
Cause
Is the problem solved by
changing the position of
the pressure roller?
PRESSURE ROLLER
2
1
1
Check
Result
Yes
2
PR STOPPER PLATE
Fig. 1-4
1-26
Remedy
Change the position of the
pressure roller.
1 1
NIP RELEASE LEVER
Confidential